SynDeck® logo

SynDeck IMO Epoxy Color (SS50XX series)

Self levelling epoxy.

Buy now Read the data sheet
Product image
Products / SynDeck® / SynDeck IMO Epoxy Color (SS50XX series)

About the SynDeck® SynDeck IMO Epoxy Color (SS50XX series)

SynDeck™ IMO Epoxy (SS50XX series) is a top-quality amine-cured epoxy coating. It is 100% solids, very low odor, user friendly, and has excellent abrasion resistance. This product cures to a resilient, high-gloss film and is available in an array of color options as well as clear. It can be applied over deck underlayments and properly prepared existing epoxy coatings. SynDeck™ IMO Epoxy SS5000 Series is self-leveling, has superior gloss, and can be applied at lower temperatures (50°F/10°C) with no blushing. Product is dry for foot traffic overnight.

CategoriesHigh-glossSelf-levellingColors

Features

  • ABS Approval
  • Meets parts 2 and 5 of annex 1 of the IMO FTP Code 2010 for Floor Finishes
  • Qualified to MIL-PRF-24613A(SH) and MIL-PRF-32584 as part of various systems
  • Meets NAG Defence Standard 07-247 as part of various SynDeck™ systems

Variants

See variants
Tan:4.5lbs (2.0kg)0.458Gal (1.73L)
Galaxy Blue:4.5lbs (2.0kg)0.474Gal (1.80L)
Navy Blue:4.5lbs (2.0kg)0.462Gal (1.75L)
Red:4.5lbs (2.0kg)0.470Gal (1.78L)
Dark Green:4.5lbs (2.0kg)0.451Gal (1.71L)
Dark Gray:4.5lbs (2.0kg)0.444Gal (1.68L)
Midnight Blue:4.5lbs (2.0kg)0.472Gal (1.79L)
Light Gray:4.5lbs (2.0kg)0.437Gal (1.65L)
Clear:4.5lbs (2.0kg)0.477Gal (1.81L)

Benefits

  • 100% solids
  • Self levelling
  • High gloss

Product files

Applications

SynDeck IMO Epoxy SS5000 Series can be applied to properly prepared substrates and marine deckings that are subject to continuous abrasion service. SynDeck Anti-Slip Additive (SS5220 or SS5250) can be integrated to improve slip resistance values. Decorative flake can also be added into the applied wet colored epoxy to give a range of textures and finishes.

  • Surface PreparationDirect to metal: This product is not designed for direct to metal application without a primer. Existing coatings and/or after re-coat window: Light abrasion to achieve a 1-3 mil (25-75 micron) surface profile. Surface must be solvent cleaned, dry, and free of contaminants.
  • MixingUsing a mechanical jiffy mixer, mix Part A Resin until a homogenous mixture is obtained. Next, pour Part B Hardener into the premixed Part A Resin. Blend the two components together for 1-2 minutes at a slow to medium speed. Take care not to introduce excessive air into the material. Scrape sides and bottom of container during the mixing process to ensure a completely homogenous mixture.
  • ApplicationBrush: Use top quality brush for best film properties. Roller: Use Lambswool or similar cover with phenolic core, 1/4 - 3/8” (6-10mm) nap thickness. Squeegee: Use high quality rubber squeegee. Application note: Pot life is dependent on the size of mixed material. Do not mix more material than can be applied within 30 minutes.
  • Clean UpClean hands and skin with warm water and mild soap. Clean tools and equipment with MEK, denatured alcohol, or acetone.

Related products

ERS Marine

Why choose ERS Marine for your SynDeck® product installations?

ERS Marine has been a trusted partner of SynDeck® for over 10 years. Our team of experts are trained and certified to install SynDeck® products to the highest standards. We offer a range of services to ensure your project is completed on time and on budget.

Get a quote