Water Base Polyurethane Matte SS2450F
Water base polyurethane matte coating.
About the SynDeck® Water Base Polyurethane Matte SS2450F
Syndeck™ Water Base Polyurethane Matte SS2450F is a two component, water base polyurethane coating that exhibits excellent adhesion, UV resistance, abrasion resistance, chemical resistance and hot tire resistance. It is a fast-curing, low odor and low VOC polyurethane which is intended for use as a decorative or industrial topcoat in both interior and exterior applications. The matte finish provides a beautiful low sheen without hindering the depth of color underneath. This product applies milky and dries clear.
Features
- ABS Approved
- Meets parts 2 and 5 of annex 1 of the IMO FTP Code 2010 for Primary Deck Coverings
- Meets parts 2 and 5 of annex 1 of the IMO FTP Code 2010 for Floor Finishes
- Meets UK Def Stan 07-247 Annex B, Category A2 (Nu-FlexDeckMSystem)
Benefits
- <50g/L VOC with low odor
- Ultra flat finish
- Superior UV resistance
Applications
SynDeck™ Water Base Polyurethane Matte SS2450F can be applied over sealed deck underlayment systems and properly prepared, existing coatings where IMO certification is required. The product is an easy-to-apply, low odor, high performance coating, ideal for sealing surfaces where a low gloss finish is desired.
- Surface PreparationDirect to metal: This product is not designed for direct to metal application without a primer. Existing coatings and/or after re-coat window: Light abrasion to achieve a 1-3 mil (25-75 micron) surface profile. Surface must be solvent cleaned, dry, and free of contaminants.
- MixingUsing a mechanical jiffy mixer, mix Part B Resin until a homogenous mixture is obtained. Transfer contents into a separate, suitable container that allows for sufficient mixing of parts A and B combined. Next, pour Part A Hardener into the larger container. Blend the two components together for 1-2 minutes at a slow to medium speed. Take care not to introduce excessive air into the material. Scrape sides and bottom of container during the mixing process to ensure a completely homogenous mixture.
- ApplicationBrush: Use top quality brush for best film properties. Roller: Use Lambswool or similar cover with phenolic core, 1/4 - 3/8” (6-10mm) nap thickness. Squeegee: Use high quality rubber squeegee. Application note: Pot life is dependent on the size of mixed material. Do not mix more material than can be applied within 30 minutes.
- Clean UpClean hands and skin with warm water and mild soap. Clean tools and equipment with MEK, denatured alcohol, or acetone.
Related products
Why choose ERS Marine for your SynDeck® product installations?
ERS Marine has been a trusted partner of SynDeck® for over 10 years. Our team of experts are trained and certified to install SynDeck® products to the highest standards. We offer a range of services to ensure your project is completed on time and on budget.
Get a quote