About the SynDeck® Super Underlayment Sealer (SS1259)
SynDeck™ Super Underlayment Sealer (SS1259) is a high thixotropic two-component epoxy specifically designed to seal underlayments, decks, floors and other surfaces. This high thixotropic index material is designed to minimize sag and material loss in areas where higher porosities may be a concern. SynDeck™ Super Underlayment Sealer provides a sealed surface for additional applications of coatings, sealers and other deck covering materials.
Features
- ABS Approved
- Meets parts 2 and 6 of annex 1 of the IMO FTP Code 2010 for Floor Finishes
- Qualified to MIL-PRF-24613A(SH) Type I, Class 2, Grade A (Super Light Terrazzo system)
Benefits
- 100% solids, 0g/ L VOC
- High viscosity & thixotropy
- Trowel & squeegee applied
Applications
SynDeck™ Super Underlayment Sealer SS1259 can be applied to seal and grout underlayment decking such as Syndeck™ underlayments: Ultra Lightweight Underlayment SS1290FC, Ultra Lightweight underlayment Terrazzo SS1290FCT, Ultra Lightweight Underlayment SS1393FC, Ultra Lightweight underlayment Terrazzo SS1360FCT, Epoxy Underlayment SS1271, and 1.5 IMO Underlayment SS1295.
- Surface PreparationDirect to metal: This product is not designed for direct to metal application. Existing coatings and/ or after re-coat window : Light abrasion to achieve a 1 - 3mil (25- 75 micron) surface profile. Surface must be solvent cleaned, dry, and free of contaminants.
- MixingUsing a mechanical jiffy mixer, mix Part A Resin until a homogenous mixture is obtained. Next, pour Part B Hardener into the premixed Part A Resin. Blend the two components together for 1-2 minutes at a slow to medium speed. Take care not to introduce excessive air into the material. Scrape sides and bottom of container during the mixing process to ensure a completely homogenous mixture.
- ApplicationTrowell: For application to coving and bulkheads, use a high quality roller or stiff bristle brush. To build sufficient material, use a top-quality flat or notched trowel depending on desired material thickness. A notched trowel will aid in air release and provide a uniform application thickness. SynDeck™ NuFlex Epoxy may also be applied with a brush or roller in a low-build application. Use of a spiked or porcupine roller after application is recommended to additionally help release air. Application note: Pot life is dependent on the size of mixed material. Do not mix more material than can be applied within 30 minutes
- Clean UpClean hands and skin with warm water and mild soap. Clean tools and equipment with MEK, denatured alcohol, or acetone.
Related products
Why choose ERS Marine for your SynDeck® product installations?
ERS Marine has been a trusted partner of SynDeck® for over 10 years. Our team of experts are trained and certified to install SynDeck® products to the highest standards. We offer a range of services to ensure your project is completed on time and on budget.
Get a quote