About the SynDeck® SynDeck Underlayment Sealer (SS1257)
SynDeck™ Underlayment Sealer SS1257 is a fast cure, marine underlayment sealer. It is designed for use over underlayments and other surfaces where high porosity is a concern. This 2 component, IMO certified marine underlayment sealer is a high thixotropic index epoxy. It seals underlayments prior to application of SynDeck™ color coats or other deck coverings. SynDeck™ Underlayment Sealer is also UK Navy approved.
Features
- Meets parts 2 and 5 of annex 1 of the IMO FTP Code 2010 for Floor Finishes
- Meets UK Def Stan 07-247 Annex B, Category A2 (IMO 1.5 1295 [Flexible Resin] system & IMO 1.5 1295 [Epoxy Resin] system)
Benefits
- 100% solids, 0g/ L VOC
- High viscosity & thixotropy
- Trowel & squeegee applied
Applications
SynDeck™ Underlayment Sealer SS1257 can be applied to seal underlayment decking such as Syndeck™ underlayments such as: Ultra Lightweight Underlayment SS1290FC, Ultra Lightweight underlayment Terrazzo SS1290FCT, ComDeck Epoxy Underlayment SS1271, and 1.5 IMO Underlayment SS1295.
- Surface PreparationDirect to metal: This product is not designed for direct to metal application. Existing coatings and/ or after re-coat window : Light abrasion to achieve a 1 - 3mil (25- 75 micron) surface profile. Surface must be solvent cleaned, dry, and free of contaminants.
- MixingUsing a mechanical jiffy mixer, mix Part A Resin until a homogenous mixture is obtained. Next, pour Part B Hardener into the premixed Part A Resin. Blend the two components together for 1-2 minutes at a slow to medium speed. Take care not to introduce excessive air into the material. Scrape sides and bottom of container during the mixing process to ensure a completely homogenous mixture.
- ApplicationTrowell: For application to coving and bulkheads, use a high quality roller or stiff bristle brush. To build sufficient material, use a top-quality flat or notched trowel depending on desired material thickness. A notched trowel will aid in air release and provide a uniform application thickness. SynDeck™ NuFlex Epoxy may also be applied with a brush or roller in a low-build application. Use of a spiked or porcupine roller after application is recommended to additionally help release air. Application note: Pot life is dependent on the size of mixed material. Do not mix more material than can be applied within 30 minutes
- Clean UpClean hands and skin with warm water and mild soap. Clean tools and equipment with MEK, denatured alcohol, or acetone.
Related products
Why choose ERS Marine for your SynDeck® product installations?
ERS Marine has been a trusted partner of SynDeck® for over 10 years. Our team of experts are trained and certified to install SynDeck® products to the highest standards. We offer a range of services to ensure your project is completed on time and on budget.
Get a quote