Sika logo

Sikafloor Marine 590 PU - 20kg

IMO approved self-levelling decorative resin.

Buy now Read the data sheet
Product image
Products / Sika / Sikafloor Marine 590 PU - 20kg

About the Sika Sikafloor Marine 590 PU - 20kg

Sikafloor® Marine-590 is a self-levelling aliphatic 2-component polyurethane decorative floor resin.It is part of the Sikafloor® Marine Deco Comfortsystem for interior use and the Sikafloor® Marine Deco Teak system for interior and exterior use.Sikafloor® Marine-590 has been tested according to the FTP Code system and is approved according the IMO Marine Equipment Directives.If Sikafloor® Marine-590 needs to beaccelerated, Sikafloor® Marine-001 or -002 can be used.

CategoriesInterior Deck CoveringsExterior Deck CoveringsDecorative

Features

  • Goodapplication characteristics
  • Very UV stable (non yellowing)
  • Decorative designs solutions
  • IMO approved
  • Very low VOC emission
  • Solvent-free
  • Longtermelastic
  • Acceleration option available

Benefits

  • Goodapplication characteristics
  • Very UV stable (non yellowing)
  • Decorative designs solutions
  • IMO approved
  • Very low VOC emission
  • Solvent-free
  • Longtermelastic
  • Acceleration option available

Applications

Sikafloor® Marine-590 is designed as a partof the Sikafloor® Marine Deco systems. It is designed for mechanical resistant internal flooring in ship and boat construction and as final compound in theSikafloor® Marine Deco systemfor interior and exterior use. This product is suitable for experienced professional users only. Tests with actual substrates and conditions have to be performed ensuring workability, adhesion and material compatibility.

Picture of the Sikafloor Marine 590 PU - 20kg product

Get the Sikafloor Marine 590 PU - 20kg installed by ERS Marine

Get a quote
  • Surface PreparationSikafloor® Marine-590 is installed as a black primary deck covering and/or as floor covering in all colors. Metallic decks need to be prepared to SA 2.5 (ISO 8501). Aluminum decks must not be shot blasted. The prepared metallic surfaces need to be clean, free of dirt, grease, oil and loose particles before the SikaCor® ZP Primer is applied.Cementitious substrates have to be mechanically prepared to remove laitance. Clean the surface and ensure a surface moisture content of ≤ 4 % before applying Sikafloor®-150 /-151 primer. The application area must be protected against weather and direct sunlight. If IMO is required, get in contact with Sika to choose an appropriate combination of theSikafloor® Marine Deco system.
  • ApplicationSikafloor® Marine-590 is poured and spread evenly by means of a notched trowel, flat trowel or pin-rake. In critical areas a spike roller can be used to improve levelling and de-airing. For deeper sections (e.g. unevenness), it might be necessary to pre-level these sections. Ensure the pre-leveled sections have achieved "foot traffic" cure level prior to proceeding. For liquid application on cambers and slopes multiple applications steps may be needed. Curing speed depends on temperature and layer thickness. Always consider the pot life to keep a wet edge. Prior to application, always consult the most current Application Manual.
  • CuringIndications regarding curing details see table below.Tempera- tureFoot trafficLight traffic AFull cure10 °C30 hours48 hours6 days20 °C16 hours24 hours4 days30 °C12 hours18 hours3 daysA)food trolleys and light rolling equipment on soft wheels
  • RemovalUncured Sikafloor® Marine-590 can be removed from tools and equipment with Sika® Colma Cleaner or another suitable solvent. Once cured, the material can only be removed mechanically. Hands and exposed skin shall be washed immediately using hand wipes such as Sika® Cleaner-350H or a suitable industrial hand cleaner and water. Do not use solvents on skin.
  • Application LimitsFreshly applied Sikafloor® Marine-590 must be protected from moisture, condensation and water for at least 1 day. Uncured material reacts in contact with water (foaming).
  • Storage ConditionsBoth components of Sikafloor® Marine-590 have to be kept between 5 °C and 30 °C in a dry place. Do not expose it to direct sunlight. After opening of the packaging, the contents need to be protected against moisture.Minimum temperature during transportation is 5°C.

Related products

ERS Marine

Why choose ERS Marine for your Sika product installations?

ERS Marine has been a trusted partner of Sika for over 10 years. Our team of experts are trained and certified to install Sika products to the highest standards. We offer a range of services to ensure your project is completed on time and on budget.

Get a quote