Sika logo

Sikafloor Marine 570 PU - 20kg

IMO approved self-levelling 2-component polyurethane decorative resin.

Buy now Read the data sheet
Product image
Products / Sika / Sikafloor Marine 570 PU - 20kg

About the Sika Sikafloor Marine 570 PU - 20kg

Sikafloor® Marine-570 is a self-levelling 2-component polyurethane decorative floor resin and part of the Sikafloor® Marine Deco systems. Sikafloor® Marine-570 has been tested according to FTP Code system and approved according the IMO Marine Equipment Directives.

CategoriesInterior Deck CoveringsExterior Deck CoveringsDecorative

Features

  • Excellent working characteristics
  • Good mechanical resistance
  • IMO approved
  • Very low VOC emission
  • Solvent-free (ISO 16001-6)
  • Permanently elastic

Benefits

  • Excellent working characteristics
  • Good mechanical resistance
  • IMO approved
  • Very low VOC emission
  • Solvent-free (ISO 16001-6)
  • Permanently elastic

Applications

Sikafloor® Marine-570 is designed as a component of the Sikafloor® Marine Deco systems. It is designed for mechanical resistant internal flooring in ship and boat construction and as final compound in the Sikafloor Marine Deco Teak systems for interior and exterior use. Sikafloor® Marine-570 is IMO approved as per the corresponding Application Manual.This product is only suitable for experienced professional users. Tests with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.

Picture of the Sikafloor Marine 570 PU - 20kg product

Get the Sikafloor Marine 570 PU - 20kg installed by ERS Marine

Get a quote
  • Surface PreparationSikafloor® Marine-570 is installed on top of the primary deck covering.All dust, loose and friable material must be completely removed from the surface before application of Sikafloor® Marine-570. The application area must be protected against weather to fulfill referenced substrate and climatic conditions.If IMO is required, get in contact with Sika to choose an appropriate combination of the Sika Marine-Deco System.
  • ApplicationSikafloor® Marine-570 is poured and spread evenly by means of a notched trowel or pin-rake. In critical areas a spike roller can be used to improve levelling. For deeper sections (e.g. unevenness), it might be necessary to pre-level these in advance and let it cure first before finishing. Always consider the pot life to keep a wet edge.Prior to application, always consult the most current corresponding Application Manual.
  • CuringIndications regarding curing details see table below.Tempera- tureFoot trafficLight trafficFull cure10 °C24 hours48 hours72 hours20 °C18 hours24 hours60 hours30 °C16 hours18 hours48 hours
  • RemovalUncured Sikafloor® Marine-570 can be removed from tools and equipment with Sika® Colma Cleaner or another suitable solvent. Once cured, the material can only be removed mechanically. Hands and exposed skin shall be washed immediately using hand wipes such as Sika® Cleaner-350H or a suitable industrial hand cleaner and water. Do not use solvents on skin.
  • Application LimitsFreshly applied Sikafloor® Marine-570 must be protected from damp, condensation and water for at least 5 days. Uncured material reacts in contact with water (foaming).
  • Storage ConditionsSikafloor® Marine-570 (B) has to be kept between 5 °C and 30 °C in a dry place. Do not expose it to direct sunlight. After opening of the packaging, the contents need to be protected against moisture. Minimum temperature during transportation is 5 °C.

Related products

ERS Marine

Why choose ERS Marine for your Sika product installations?

ERS Marine has been a trusted partner of Sika for over 10 years. Our team of experts are trained and certified to install Sika products to the highest standards. We offer a range of services to ensure your project is completed on time and on budget.

Get a quote