Sika logo

Sikafloor Marine 505 PU Colour - 10kg

Waterbased 2-component polyurethane pigmented matt topcoat for internal decks.

Buy now Read the data sheet
Product image
Products / Sika / Sikafloor Marine 505 PU Colour - 10kg

About the Sika Sikafloor Marine 505 PU Colour - 10kg

Sikafloor® Marine-505 is a water based 2-component polyurethane colored matt topcoat for internal decks. It is used as a component of the internal Sikafloor® Marine Deco systems.Sikafloor® Marine-505 has been tested according to FTP Code system and approved according the IMO Marine Equipment Directives.

CategoriesInterior Deck CoveringsDecorative

Features

  • Very low VOC emission
  • Good UV resistance
  • IMO approved
  • Excellent working characteristics
  • Easy to clean

Benefits

  • Very low VOC emission
  • Good UV resistance
  • IMO approved
  • Excellent working characteristics
  • Easy to clean

Applications

Sikafloor® Marine-505 is designed as a component of the Sikafloor® Marine Deco systems for internal decks in ship and boat construction. This includes wet and dry areas.This product is suitable for experienced professional users only. Test with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.

Picture of the Sikafloor Marine 505 PU Colour - 10kg product

Get the Sikafloor Marine 505 PU Colour - 10kg installed by ERS Marine

Get a quote
  • Surface PreparationDust, loose and friable material must be completely removed from all surfaces before application of the product, preferably by brush or vacuum. Ensure that substrates are clean, dry and free from all contaminants such as dirt, oil, grease, coatings and other surface treatments.
  • ApplicationPrior to application confirm relative air humidity and dew point.When starting to coat, make sure the coating rollers are well saturated with coating.After proper mixing the product is poured and spread out on the floor in respect of the coat weight. Note: Keep an eye on the pot life since the end of the pot-life is not visible.Roll with a larger 50 cm roller in one direction cross the working direction to eliminate lap-marks.Always consult the most current corresponding Application Manual.
  • CuringIndications regarding curing details see table below.Tempera- tureFoot trafficLight trafficFull cure10 °C36 hours48 hours6 days20 °C16 hours24 hours4 days30 °C12 hours18 hours3 days
  • RemovalUncured Sikafloor® Marine-505 can be removed from tools and equipment with water. Once cured, the material can only be removed mechanically. Hands and exposed skin have to be washed immediately using hand wipes such as Sika® Cleaner-350H or a suitable industrial hand cleaner and water.Do not use solvents on skin.
  • Application LimitsFreshly applied Sikafloor® Marine-505 must be protected from damp, condensation and water for at least 5 days. Uncured material reacts in contact with water (foaming).

Related products

ERS Marine

Why choose ERS Marine for your Sika product installations?

ERS Marine has been a trusted partner of Sika for over 10 years. Our team of experts are trained and certified to install Sika products to the highest standards. We offer a range of services to ensure your project is completed on time and on budget.

Get a quote